Shop

Brass Cap

The Brass Cap is a BSP fitting designed to safely and securely cap off pipework. With a BSP tapered thread, it provides a reliable seal for both temporary and permanent applications, making it a versatile choice for water and gas systems.

Key Features:

• Material: Manufactured from high-quality DZR (dezincification-resistant) brass, built for Australian conditions
• Thread Type: BSP tapered thread for secure fitment
• Applications: Used to close off pipework in water and gas installations
• Strength & Durability: Resistant to corrosion, mechanical stress, and chemicals
• Compliance: WaterMark approved and manufactured to AS3688 standards
• Performance: Maximum working temperature of 60C and maximum pressure rating of 2000 kPa
• Installation: For consistent watertight seals, use with Teflon tape and sealing paste (e.g. Mirror Paste)

Why Choose Brass Caps?

Screwed brass fittings are strong, safe, and long-lasting. By using DZR brass, these caps are designed to resist dezincification and corrosion, ensuring they perform reliably in harsh environments. Each batch is tested against Australian Standards, giving you confidence in quality and compliance. Many fittings are also produced from recycled brass, making them a sustainable choice.

Important: Installation must be performed by a licensed plumber if used in pipework connected to mains water or gas.

Available Sizes:

• FSB2200 Brass Cap 3mm
• FSB2201 Brass Cap 6mm
• FSB2202 Brass Cap 9mm
• FSB2212 Brass Cap 12mm Flat Hex
• FSB2212CP Brass Cap 12mm Flat Hex Chrome Plated
• FSB2213 Brass Cap 20mm Flat Hex
• FSB2213CP Brass Cap 20mm Flat Hex Chrome Plated
• FSB2205 Brass Cap 25mm
• FSB2206 Brass Cap 32mm
• FSB2207 Brass Cap 40mm
• FSB2208 Brass Cap 50mm
• FSB2209 Brass Cap 65mm
• FSB2210 Brass Cap 75mm